gate drive transformer document 519 document 519 revised 01/28/16 1. when ordering, please specify packaging code: da2099-al d packaging: d = 13 machine ready reel. eia-481 embossed plastic tape (500 per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. inductance measured at 100 khz, 0.3 vrms, 0 adc 3. leakage inductance measured at 100 khz, 0.3 vrms with secondary pins shorted. 4. based on bsat of the core at 25c and number of turns of the primary. 5. capacitance measured at 100 khz, 0.3 vrms. 6. electrical specifcations at 25c. refer to doc 362 soldering surface mount components before soldering. primary leakage primary secondary volt-time capacitance part turns inductance 2 inductance 3 dcr max dcr max product 4 pri to sec 5 number 1 ratio 20 % (mh) max (h) (ohms) (ohms) (v-sec) max (pf) da2099-al_ 1 : 1 3.79 13.0 2.30 2.85 221 13.0 for on semiconductor ncp1652 and ncp4302 6 pr i sec 1 10 5 10 6 5 1 1 5 d a2099-al xxxx y recommende d land p attern 0.453 11,50 0.512 13,00 0.256 6,50 0.394 10,00 0.063 1,60 0.079 2,00 0.063 1,60 0.028 0,70 0.079 2,00 max dot indicates pin 1 inter nal code max max 0.004/0,10 10 6 pa r ts manuf actured pr ior to no v ember 2011 ma y be mar k ed diff erently . 0.362 9,20 dimensions are in inches mm core material ferrite terminations rohs compliant tin-silver (96.5/3.5) over tin over nickel over phos bronze. other terminations available at additional cost. weight 1.35 g ambient temperature C40c to +125c storage temperature component: C40c to +125c. tape and reel packaging: C40c to +80c resistance to soldering heat max three 40 second refows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited foor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 500/13 reel; plastic tape: 24 mm wide, 0.36 mm thick, 20 mm pocket spacing, 6.13 mm pocket depth pcb washing tested with pure water or alcohol only. for other solvents, see doc787_pcb_washing.pdf ? designed for on semiconductor for use with the ncp1652 pfc controller and the ncp4302 flyback controller. ? requires only 1.5 cm 2 of board space ? 1500 vrms primary to secondary isolation ? can be used from 20 khz to 250 khz. us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2016 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check web site for latest infor mation.
|
